QUARTERSMITH WOOD ART
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Page 1
~ ~ P L A N N I N G ~ ~
The first step was the planning process. I began
by drawing actual size plans using AutoCad. The bracing pattern I chose was
based on the original Martin X-brace style. Less tone bars were used because
I wanted to use a jazz style bridge. I wanted the top to be as light as possible
for the greatest range of vibration. The back is also traditionally braced
using the Martin style. I then used a traditional 24 1/2 inch scale fretboard,
with the neck attached at the 14th fret using the Cumpiano mortised tendon
joint. |
< < On To Page Two! >
>
______________________________
QUARTERSMITH.US |